|
|
|
|
|
|
|
|
|
|
|
|
|
|
The H 3531 casement crank handle is aluminum die-cast and has a 5/16 in bore spindle. This fits any operator with a 5/16 in bore spindle such as the teardrop style casement operators (see H 3502 and H 3508). It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 2-11/16 in.
|
The H 3533 casement crank handle is bronze die-cast and has a 3/8 in bore spindle. This fits any operator with a 3/8 in bore spindle such as the square style casement operators (see H 3514 and H 3520). It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 2-11/16 in.
|
The H 3966 is a stone die-cast crank handle that fits older Andersen casement operators. The 3/8 in bore fits Andersen 3/8 in spindles and is held firmly in place with the supplied set screw. This tee handle is stone in color. The Tee design is often used to replace the normal crank handle when it interferes with window blinds.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The H 3685 awning crank handle is aluminum die-cast and has a 3/8 in bore spindle. This fits most awning operators with a 3/8 in bore spindle such as the universal H 3554 or H 3555. It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 3-1/2 in.
|
The H 3893 is a die-cast universal fit tee handle in satin bronze. It comes with 5 inserts that allow the Tee handle to fit the 5 most popular sized casement operator spindles. No guessing needed, fits every time. The adaptor fits over the existing operator spindle and is locked onto the spindle with the tee handleset screw.
|
H 3546 is a universal louver operator in aluminum finished die-cast construction. The mounting holes are 4-3/4 or 3-7/8 in apart. It is a reversible non-handed design that can be used on either left or right handed installations. The universal link arm comes with break-off points with holes every 1/2 in providing a link arm 1-13/16 to 5-5/16 in long to accommodate the needs of installation. It comes with a matching tee handle that fits the 5/16 in spindle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
H 3670 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Pan-American windows. It is right handed with a matching crank handle with a 2-5/8 in link arm. It has an L shaped mounting hole pattern that has 2 top holes that are 5-1/4 in from center of the top holes to the center of the bottom hole and the 2 horizontal holes in the bottom leg are 1-5/16 in apart.
|
H 3672 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Stanley-C and E windows. It is right handed with a matching crank handle with a 2-3/16 in link arm. It has an L shaped mounting hole pattern that is 5-1/4 in from center of the top hole to the center of the bottom hole and the 2 horizontal holes in the bottom leg are 1-3/8 in apart.
|
H 3668 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Air Control-Keller windows. It is right handed with a matching crank handle with a 2-3/8 in link arm. It has an L shaped mounting hole pattern that is 5-1/4 in from center of the top hole to the center of the bottom hole and the 2 horizontal holes in the bottom leg are 1-1/8 in apart.
|
|
|
