|
|
|
|
|
|
|
|
|
|
|
|
|
|
Twin probe circuit tester tests AC/DC voltage from 80 to 250 VAC/VDC. The neon indicator glows when voltage is present and brightens as voltage increases. Offers insulated housing and test leads for safety. Built-in pocket clip for added convenience. Tests DC motors, switches and outlets.
|
For testing electric circuits from 90 to 600 volt. Detects presence of power on either AC or DC circuits. Identifies circuit conductors.
|
This low voltage tester tests for AC/DC Voltage from 5 to 50 VAC/VDC, 50 to 60 Hz. The indicator glows when voltage is present and brightens as voltage increases. Applications include testing low volt outdoor lighting, low volt control panels, doorbells, alarm systems and automotive 12 VDC and 36 VDC.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The continuity tester is very easy-to-use and is used to test for breaks in non-energized wires or cords. Continuity has a bright 360 deg visual indicator located near the tip along with a flexible lead for ease of use.
|
Heavy-duty 3-way voltage tester tests AC/DC voltage at 120, 240 and 277 V. Individual indicators for each voltage range assures reliability. 24 in test lead is long enough for convenient testing. Unit is both durable and compact. Testing applications include outlets, panels, light fixtures, switches, circuit breakers and more.
|
This handy standard receptacle tester features a compact, comfortable, contoured design with neon indicators that display positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle (110 to 125 VAC circuits) and a succession of yellow and red lights provides indication of circuit status or specifies wiring errors. Lamps reveal 5 common wiring errors including open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse, as well as correct wiring. Easy to read status chart displayed on both top and bottom of the tester for multiple position viewing. Designed for use on standard outlets and extension cords.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safety is the number one priority on any jobsite. Gardner Bender's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal, the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
|
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal. The condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
|
Tests ground fault receptacles by overloading circuit and tripping GFCI. Tests for ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Southwire Receptacle Tester, 120 V Supply
|
Testing for voltage to any electrical project is important for your safety. This compact multi-purpose unit makes it easy with a combination voltage probe and continuity tester built into a single unit with a convenient screwdriver tip designed for quick faceplate removal. Its compact size fits easily into a pocket or tool box for retrieval as needed. Use to test outlets, fuses, switches, electronics, extension cords, light fixtures and low voltage lighting circuits.
|
Model 40141S four-way voltage tester is a handy, pocket size tester that checks live AC voltage from 120 to 480 V and DC voltage from 160 to 600 V in four easy steps. The 40141S is easy to read and features a convenient, compact design.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy-to-use receptacle tester identifies common wiring errors in 120 VAC outlets plus tests GFCI outlets. Performs seven tests including the GFCI test.
|
A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The Gardner Bender GVD-3504 Circuit Alert non-contact voltage tester features both audible (beeping) and visual (360 deg flashing red light) indicators to alert the user of the presence of AC voltage from 50 to 600 V. Use to locate breaks in wires and voltage at outlets, circuit breaker panels, light fixtures, switches and motors. Quickly locates the hot terminals in receptacles. Fully insulated probe tip eliminates the risk of contacting live electrical wires. Built-in patented safe test feature ensures tester and batteries are working properly. The unit includes a pocket-clip for secure portability.
|
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Pocket sized analog tester. Tests voltage, DC voltage, DC current, resistance, continuity and batteries.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
60010S test lead kit includes universal replacement leads for all Southwire meters except for the 10010S analog multimeter.
|
Southwire Adapter Kit, Dimensions: 3.94 in H x 1.1 in W x 3.15 in D, Includes: Light Bulb Socket Adapter and Alligator Clip Adapter
|
Southwire Alligator Clip Kit, 0.8 in Jaw Opening, 1000 V, 1.81 in Length, 3.46 in Width
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Southwire NCV Detector, Measuring Functions: AC Voltage, Measuring Range: 100 to 600 VAC, Display Type: LED, Power Source: Battery, Temperature Rating: 32 to 104 deg F, Dimensions: 6.23 x 0.83 x 0.99 in
|
Gardner Bender's GUSB-3450 USB multimeter is used to confirm USB port voltage and current and check chargers, cables and USB ports. The tester features a high-impact housing and a pocket clip. Measure current draw, measure performance of solar USB chargers and test for proper wiring and polarity. The easy to understand display alternates between volts and amps. Features a 1 year warranty.
|
A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. Engineered to specifications required by professional electricians the Sperry Instruments VD6509 adjustable non-contact voltage detector allows for sensitivity adjustments in multiple-wire applications when precision and safety are crucial. This unit features an adjustable sensitivity dial able to detect the presence of AC Voltage from as low as 12 V to up to 1000 V AC and provides both audible (beeping) and visual (360 deg flashing red light) indicators to alert the user of the presence of voltage. It also includes a built-in flashlight. The fully insulated probe tip eliminates the risk of contacting live electrical wires while the patented battery check feature designed into the unit ensures tester and batteries are operating properly, virtually eliminating false negative readings. This unit features 250 lb crush rated impact-resistant ABS housing to withstand tough worksite applications while the design ensures a positive user experience over long hours of repeated use. Applications include testing doorbells, low voltage lighting, security system wires, AC energized wires, quickly locating hot terminals in receptacles, pinpointing breaks in wires and detecting the absence/presence of voltage at outlets, circuit breaker panels, light fixtures, switches and motors. The unit includes a pocket-clip for secure portability. Tester is cETLus Listed, CE Certified, CAT III 1000V/IV 600 V rated and includes a limited lifetime warranty. Operates from a single AAA battery (included). Frequency 50 to 60 Hz.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 41151S compact voltage and GFCI tester features an easy to read LED display. It's a simple and safe way to test for live circuits, measure voltage and test if GFCI circuits are functioning properly. This pocket tester tests AC voltage up to 480 V and DC voltage up to 110 V.
|
This indispensable household tester kit includes the most commonly used testers to test voltage, GFCI receptacles, batteries and USB ports. The voltage tester allows the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The included GFCI receptacle tester detects common wiring problems in standard and GFCI protected outlets. Simply plug it in and view the light pattern on the tester to determine if it's correct, open ground, open neutral, open hot, hot/ground reverse or hot/neutral reverse. Tester works on 110 to 125 VAC receptacles only and will not indicate quality of ground. The battery tester tests common household battery types (AA, AAA, C, D and 9 V batteries) to determine existing charge. Finally, the USB tester can check USB ports for the presence of voltage and test for proper wiring and polarity. Simply plug it into a USB port and the indicator bulb will glow a certain color to tell you the condition of the USB port.
|
When you're ready to add a multimeter to your toolbox this unit is a great place to start. This tester is designed to work on most household appliances and is equipped with an easy to read 3-1/2 in digital display and three testing functions - AC voltage to 500 V, DC voltage to 600 V and resistance to 2 mOhm. The 11 position manual ranging smooth rotary style achieves precise readings and the low battery indicator ensures an accurate read-out. Durable housing is drop-resistant to 3 ft and crush-rated to 150 lb. Tester is rated Cat III 600 V. Unit comes pre-packaged with secure-fitting 26 in test leads and operating instructions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This multifunctional analog multimeter was designed for the homeowner, hobbyist or professional needing to make electrical and electronic equipment measurements. Capable of measuring 6 functions on 14 ranges on it is easy to read color-coded analog display you'll find yourself reaching for this handy unit almost every time. Unit tests AC and DC voltage of 10-50-250 and 500 V, DC current 250 mA, up to 50K of resistance, -20 to +56 dB decibels on AC voltage ranges and common household batteries from 1.5 V thru 9 V. Unit includes built-in 0 Ohm adjustment dial allowing you to reset prior to resistance testing and to perform internal battery test function. Unit incorporates fuse overload protection circuitry to protect the user and a mirror scale is provided to reduce the possibility of parallax errors. Ships with test leads and a tri-lingual instruction manual and includes a 1 year warranty. Common measurements with this unit include - testing household batteries for charge level, troubleshooting various low voltage circuits, testing wall receptacles for proper voltage and grounding and troubleshooting electrical cords, stings of lights, fuses and switches to determine if they are operating properly or if a break in the circuit exists and the item in question needs to be repaired or replaced. The decibel feature of this multimeter is used for transistor gain measurement in electronic circuits and should not be confused with audio decibels.
|
The stop shock II circuit analyzer makes it easy to test gfci receptacles and determine the appropriate wiring correction needed. This GFCI tester uses advanced circuitry and a patent-pending proprietary design to precisely detect the required low resistance (less than 10 Ohms) on ground wire and provides a clear and easy-to understand single led readout indication for correct wiring or bad ground, open neutral, hot/gnd reverse, hot/neu reverse and open hot wiring errors without the need to memorize or decipher a dual-indication chart. The stop receptacles require GFCI test function to test outlets wired in parallel to GFCI circuits (bathroom, kitchen and outdoor receptacles require GFCI protection). Designed for the jobsite this tester features hi-impact abs housing with a 250 lb crush rating and the ability to withstand drops of up to 10 ft.
|
A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. Engineered to specifications required by professional electricians the Sperry Instruments VD6508 non-contact voltage detector features both audible (beeping) and visual (360 deg flashing red light) indicators to alert the user of the presence of AC voltage from 50 to 1000 V. It also includes a built-in flashlight. The fully insulated probe tip eliminates the risk of contacting live electrical wires while the patented battery check feature designed into the unit ensures tester and batteries are operating properly, virtually eliminating false negative readings. This unit features 250 lb crush-rated impact-resistant ABS housing to withstand tough applications while the design ensures a positive user experience over long hours of repeated use. Applications include quickly locating hot terminals in receptacles, pin pointing breaks in wires and detecting the absence/presence of voltage at outlets, circuit breaker panels, light fixtures, switches and motors. The unit includes a pocket-clip for secure portability. Tester is cETLus Listed, CE Certified, CAT III 1000V/IV 600V rated and includes a limited lifetime warranty. Operates from a single AAA battery (included). Frequency 50 to 60 Hz.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Southwire NCV Tester, Voltage, 12 to 1000 VAC Measuring, LED Display, Audible, Visual Indication, Battery Power Source, 32 to 104 deg F, Dimensions: 6.23 x 0.83 x 0.99 in
|
The Southwire electrical test kit combines three of Southwire's most popular test and measurement products into one convenient kit. Ideal for household repairs and electrical troubleshooting.
|
Southwire Continuity Tester with Remote, Professional, LED Display, Bright LED Indication, Battery Power Source, 10 to 113 deg F, Dimensions: 4.85 in H x 1.25 in W x 2.15 in D
|
|
|
